Photos of Additions & Modifications (Long)

Spring in Oswego, NY

Spring in Oswego came early, and, as usual, very changeable (photos are a couple of days apart).

In any case, I've been discussing trailer modifications in the last couple of posts so now that I'm almost done, I thought some photos of them might be worth posting.

The first shows both the Progressive EMS-HW30C Surge Protector & the Xantrex ProWatt SW 1000 watt inverter. While I installed the surge protector early this summer & it has shut down the trailer a couple of times because of low voltage & once because of reversed polarity, the inverter is new.  I like to make a cup of drip coffee in the morning, and although the coffee pot didn't require a pure sine wave inverter, some things do, so that was my choice.

Rather than adding a transfer switch, I added a dedicated outlet on the side of the sink.  The remote is located in the front of the sink cabinet.

While the Prowatt inverter remote will shut off the inverter completely, I added a heavy duty (200 amp) switch since I prefer to have a way (other than the fuse) to disconnect the input wiring to the inverter. 

I also moved the trailer disconnect switch forward so that it is easier to reach when the dinette is made into a bed (something I have pretty much done permanently).

The next additions are some fancy hooks.  I've been using the 3M temporary hooks, moving them around until I found the most useful locations for them.  I was never sure the hooks would stay on the walls (although they did) so once I found a post on the Escape Forum describing Umbra Folding Hooks, I was "hooked."

The first set is on the refrigerator wall facing the exit door.  I had to cut one hook off the length to make it fit & discovered that there is a steel hinge wire between the hooks. Oh well, I needed a new 10" fine toothed blade for the power miter box anyway!

The second one is on the bathroom wall next to the front dinette.  The photo also shows the C0 detector I added.  I also changed the smoke detector to a dual sensor version that has a hush button - got tired of taking down the one that came with the trailer & stuffing it under the bed covers every time I made toast!

A minor addition is a mirror on the inside of the bathroom door:

I also changed a couple of the LED lighting fixtures for dual LED fixtures.  One is at the head on the bed, and the other on the side of the front dinette where I usually sit.  Although neither was necessary, I like to read & for some reason, the print on paperback books seem to be getting smaller the older I get!

There have been a number of posts on the Casita Travel Trailer Forum (you may need to join to see the post) describing adding a refrigerator light - since my 5 cu ft fridge doesn't have one I thought it would make a good addition.  I used a strip long enough that it could be run up the side & part way across the top above the freezer door, that way I have light in both parts.  Probably should have used white wire to make it pretty, but black is what I had.  If it bugs me enough I'll change it in the future...

A much more involved modification was adding adjustable shelves to the closet.  It came with a closet pole for hanging clothes, however I rarely wear anything that needs hanging, and for the few shirts & jackets that do, I now have the folding hooks.  

I wanted them adjustable because I'm not sure how much space I need on each.  I went a bit overboard on the shelves - they are "stress skin"; 1/8" Luan plywood on the bottom & 1/8" White Cote Masonite Hardboard on top, separated by 1/4" hardwood strips.  I've used the technique for building light weight theatre scenery & it makes very strong, lightweight shelves.

Here are two more changes - I added a square fence post to hold the sewer hose.  The original was a 4" round drain pipe that wasn't large enough to hold a heavy duty hose with a right angle connection. 

I also added a vinyl "LakeshoreImages.com" sticker to the back of the trailer.

The rest of the changes are not worth a photograph.  Everything mentioned in the pervious post are done with the exception of the new Marinco Inlet.  I had to return the chrome, screw cover inlet since it was smaller than the hole in the side of the trailer.  I talked with Marinco, and they said they will send me a replacement for the one that the cover failed.  Hope it comes soon - I'd like to finish the projects & get the trailer ready to travel!

Next week the trailer goes for bearing  & brake service, after which it & I will be ready to head south.  Unfortunately, I have a couple of appointments the first week of April, so I'll have to stay in Oswego until then.

Till next time - 

Uncovering the Trailer

Middle Falls, Letchworth State Park, NY















Today's "Big News" is I pulled the cover off the trailer.  Probably too early since we often have snow even into April, but I have been working on the inside & I'm tired of zipping & unzipping the opening for the door.

I cleaned up the batteries & sprayed some terminal sealer on them hoping to keep them clean.  I also added a "LakeshoreImages.com" sticker to the back of the trailer.

I do need to wash it - while I washed & waxed the trailer after my summer trip, I didn't after the fall one & the roof definitely needs a bath.  The weather tomorrow is suppose to be even nicer than today (we hit 57°F today) so I'll wash it then & maybe do some more work on the last project- the shelves in the closet.

Till Tomorrow!

Working on the "Projects"

The Reflective Pool, Luray Caverns, VA














Well the weather was right for working on the trailer - It was in the 60's today, in fact at 7:00 it is still 60°F out.   Since it is suppose to rain tomorrow, I started on the outside projects first.

Unfortunately, the new mount for the Marinco inlet is smaller than the one currently on the trailer so I'm going to have to live with the old one flapping in the breeze until I can find an exact match.

I did get most of the rest of the projects finished.  I now have a light in the refrigerator.  I mounted the strip of LEDs so that they light both the main section as well as the freezer.  A window alarm magnetic switch takes care of turning it off & on.

The new smoke detector(a dual ionization/smoke) with a hush switch, as well as a C0 detector are now installed as well as the folding clothing hooks & a dual LED overhead light.  I also added 2 dual circuit breakers so each circuit is now on its own breaker.

The most involved project was moving the battery disconnect switch & rewiring the feed to the converter.  It's done & everything works.

I haven't started the shelves for the clothing closet, but I did decide how I'm going to do them.  I'm adding some hardwood strips to the sides that are drilled for adjustable brackets.  I picked up the shelf material & strips - just have to do some layout & drilling to get them installed.  It is a bit tricky since the back of the closet is the outside shell of the trailer & is curved.  I'll probably make 2 shelf sizes, one set for the top & bottom & the other for the deeper middle.

So, I got more accomplished than I expected - must  have been the nice weather.  Now I'm going to wait until midnight & check across the lake for the Northern Lights.  The recent solar flare may produce them here on the southern side of Lake Ontario.

Till next time

9 Trailer Projects

Mesa Arch at Canyonlands National Park, UT














Not much new in the way of photographs, so I'm going to post some of the older images until I find some new & interesting subjects.

Well it was suppose to hit 50°F today, however at 2:00 it is 41°F and dropping.  I was going to get started on some of the trailer modifications & updates I've planned over the winter but I think I'll wait for it to warm up a bit.

I've got a list of 9 "projects".  For many it is a boring list & you can ignore the rest of the post, but for those interested...

Actually, none of them are critical, but I'm the type that likes to putter around & make improvements.  They include adding a C0 detector and replacing the smoke detector with one that has a "Hush" button - I'm tired of tearing the current one off the wall & stuffing it under the blankets when ever I make toast!

I also have some electrical updates.  Since I added #0 cables to install a 1000 watt sine wave inverter, the #10 wires between the batteries & the converter nom't make sense so I'm going to connect the converter feed to the inverter wiring.

Since I have decided to leave the rear table set up as a bed permanently, I'm also going to move the battery disconnect switch to a more accessible location. Other changes are going to be the addition of additional circuit breakers - currently all the receptacle outlets are wired to one 15 amp breaker.  Since there is room in the converter for additional breakers I rather put some of the receptacles on individual breakers.

I've seen a couple of posts at The Casita Forum  for adding a interior light to the refrigerator. Since mine didn't come with one it is a welcome addition.  Finding a path for the wiring will be interesting but it looks like an useful project.  The last electrical "project" is to replace my Marinco 30 amp inlet.  The door on the current one doesn't stay closed driving down the road.  It flaps in the breeze.  Probably not all that much of a problem (although the hinge pin is getting a little worn) but I have a replacement that has a locking cover.

That's it for the electrical projects - I do have one additional one - I purchased a couple of Umbra Flip Wall-Mount hooks to hang jackets, shirts, etc. Although there is a hanging rod in the closet, I'm going to remove it & add shelves.  I think that will be a better way to store the types of clothing I normally wear while traveling.  The folding hooks will hold the few button down shirts, sweaters & jackets I take with me. I haven't quite decided what kind of shelves I want to add.  The wire closet shelves available at Lowes is one direction, adding some peg board sides & some adjustable wood shelves is another.

That is about it for now.  I do have one "announcement" on the non trailer front - I'm now a National Geographic photographer.  Of course I do have to clarify that a bit - National Geographic Books, not the magazine bought one of my images.

Till next time -

A Trip to Oceanside

Zoe

Well I did do some traveling, but without the trailer.  As I mentioned in an earlier post, my daughter and her family have moved to Gaborone, Botswana.  Brian is managing a project there for at least the next two years.  Last week he had a conference in DC, so the whole family packed up for a visit to the USA.  I decided it would be a great time to drive down to Oceanside to visit with them while they were visiting Brian's parents.  Everyone is doing fine, and I took lots of pictures.  If you are interested, check the Oceanside link at Lakeshore Images.
Had an interesting phone call while in Oceanside - Capitol One called to ask if I was making charges in China.  Since I wasn't, they suspended the card & mailed me a new one.  I have no idea how they got the card number but I have been using it for most of my purchases since it has a better rewards than my HSBC cards.  Oh well, I'm glad they caught it quickly.

They offered to send it to Oceanside, but since I was going home the next day, they sent it to Oswego. The new card was waiting for me when I got home; I activated it, however it was declined when I tried to use it the next day.  Another phone call to Capitol One & everything is back to normal.  I even had one of my own photos added to the card.

I'm still planning to "thaw" out the trailer in early April & head out for another spring & summer of travel.  Everything is a bit loose right now (well, all my travels could be described as "a bit loose") since I hate to plan too far ahead.  I do want to see Cedar Key in Florida, and plan a stop in The Woodlands, TX to see my sister in law, and I need to be at Bullard Beach State Park in Oregon for a fiberglass trailer rally July 11 - 14. I hope to see New Mexico, revisit some locations in Arizona & Utah, and drive the Mount Baker Scenic Highway in Washington.  If I'm still out west, I would also like to hit the 2nd Annual Rocky Mountain Egg rendezvous in Leadville, CO while visiting friends there.

I feel like I could leave today.  This has been one of the mildest & least snowy winters I can remember here in Oswego.  The biggest storm of the season (about 1') was while I was in Oceanside, and it melted before I got back.  We have had less than 2' of snow all winter - we would normally have well over 5' by now.

I have a few more projects to do on the trailer before I leave.  I did add a 1000w sine wave inverter (mostly so I can make a pot of coffee in the morning!) but I still want to add some lightweight shelves to the "closet", and install a 2' square mirror somewhere.

I also need to find a practical way to store a spare tire for the RAV4.  I gave up on the run flat tires.  I had to replace the second set at 40K miles, and since they ride hard, are useless on snow, and cost $275.00 each, I went with real snow tires for the winter.  I purchased another wheel, and will buy 5 real tires in the spring.  Still deciding whether to add a rack for the tire on the roof or just stick it in back behind the seats.  I'd love to find a 2010 RAV4, (preferably Barcelona Red) and an owner that wants to trade a rear door with, as my granddaughter says "a button" for my door without one, but I don't think that is all that likely.

Until Next time!